Page 8 of 10

Re: HOWTO: Use the repository on K/Ubuntu 9.10 and 10.04

Posted: 07/05/2010, 20:31
by cragg.
My system works with

1.6HGz: VID 19
1.3GHz: VID 15
1GHZ: VID 15
800MHz: VID 15

:D

You say it, voria! its impressive :)

Re: HOWTO: Use the repository on K/Ubuntu 9.10 and 10.04

Posted: 14/05/2010, 20:52
by CaptnDifool
What I do wrong? :( (32bit for NC10)

Code: Select all

captain@orion:~$ sudo apt-get install --reinstall --allow-unauthenticated voria-ppa-keyring
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut       
Status-Informationen einlesen... Fertig
E: Paket voria-ppa-keyring konnte nicht gefunden werden -> "Packet  voria-ppa-keyring don't found".
captain@orion:~$ 
In the 64bit-repo I have no problems.

Re: HOWTO: Use the repository on K/Ubuntu 9.10 and 10.04

Posted: 16/05/2010, 11:29
by voria
I've removed the package 'voria-ppa-keyring' because it's no more needed.
Take a look at the new instructions in the first post of this thread.

Re: HOWTO: Use the repository on K/Ubuntu 9.10 and 10.04

Posted: 16/05/2010, 12:14
by CaptnDifool
That I had read, but in synaptic I get warnings, that the 32bit repo is "unauthorized".

Re: HOWTO: Use the repository on K/Ubuntu 9.10 and 10.04

Posted: 16/05/2010, 12:21
by voria
This is strange.
Well, use this command to manually add the GPG key for the repository:

Code: Select all

sudo apt-key adv --keyserver keyserver.ubuntu.com --recv 1E5F36F0
then update the packages index:

Code: Select all

sudo apt-get update

Re: HOWTO: Use the repository on K/Ubuntu 9.10 and 10.04

Posted: 16/05/2010, 16:53
by CaptnDifool
voRia wrote:This is strange.
Well, use this command to manually add the GPG key for the repository:

Code: Select all

sudo apt-key adv --keyserver keyserver.ubuntu.com --recv 1E5F36F0
then update the packages index:

Code: Select all

sudo apt-get update
This command might be a little bi different, but its works well! :)

Thank you a lot! :) :)

Re: HOWTO: Use the repository on K/Ubuntu 9.10 and 10.04

Posted: 09/06/2010, 18:50
by alexomat
Hey there,

a couple of hours ago, I just installed any form of linux (10.04) for the first time in my life - and so far i really like the experience :-)

I put it on my n510 as i was too blown away by the Win7 performance.

Everything seems to be working fine, but still I cant get the Brightness Control to be working. All the other FN keycombinations are doing alright.

What am I missing?

I already tried your Repository and this http://what-ho.posterous.com/linux-hotk ... ng-laptops

Thanks
Alex

Re: HOWTO: Use the repository on K/Ubuntu 9.10 and 10.04

Posted: 17/06/2010, 14:33
by voria
The problem is related to the NVIDIA video card.
Make sure you are using the latest BIOS available from Samsung, other N510 users have reported it fixes the problem.

Re: HOWTO: Use the repository on K/Ubuntu 9.10 and 10.04

Posted: 23/06/2010, 20:25
by Steph
Hello,

Ubuntu Netbook Edition on N220 out of the box with Voria's repos :)
No Compiz at the installation. Have to install it manually after.

No problem. All works fine.

Thank you Voria !

So, a little donate ;)

Re: HOWTO: Use the repository on K/Ubuntu 9.10 and 10.04

Posted: 30/06/2010, 15:09
by voria
Thank you very much! :)

Re: HOWTO: Use the repository on K/Ubuntu 9.10 and 10.04

Posted: 03/07/2010, 14:55
by Steph
Hello,

New Kernel 2.6.32-23-generic from Voria's repository doesn't work on N220.
No Fn for brightness, ventilo, wifi :(
Fonctions unactivated in Samsung Tools.

Still works fine with 2.6.32-22.

Re: HOWTO: Use the repository on K/Ubuntu 9.10 and 10.04

Posted: 03/07/2010, 15:01
by surjagain
I confirm what Steph says.. the backlight, brightness Fn keys and wireless keys do not work with the current kernel update 2.6.32-23-generic from the voria repo on Samsung N148 and N150. :(

Re: HOWTO: Use the repository on K/Ubuntu 9.10 and 10.04

Posted: 03/07/2010, 17:11
by voria

Re: HOWTO: Use the repository on K/Ubuntu 9.10 and 10.04

Posted: 03/07/2010, 20:15
by Steph
OK ! Works perfectly.

Thank you very munch :)

Re: HOWTO: Use the repository on K/Ubuntu 9.10 and 10.04

Posted: 17/07/2010, 17:14
by stevedee
Hi
I have problems with my new Samsung N220 Marvel and the Fn keys.

What does work:
Fn+F3 = webcam on/off
Fn+F5 = mute /unmute
Fn+Esc = sleep
Fn+F11 = numpad
Fn+right/left = volume

All other actions don't work with the Fn key.
I have installed samsung-tools and samsung-backlight.
If I start samsung-tools-preferences I can change the shortcuts for backlight,bluetooth,cpu,webcam,wlan,
i.g. Wlan = ctrl+F7 → Then this action works.
But I can't change the shortcut to „Fn+F7“. The Fn-key is not recognized!

Do you have a solution for this problem?
I'm using Kubuntu netbook 10.04; kernel 2.6.32-23-generic

Many thanks.
steve