ciao, ti ringrazio per l'interessamento.
al momento sto cercando di seguire questa guida (
http://www.pharscape.org/icon225.html)
che è specifica per questa penna, però per adesso nulla.
Network manager, cosa dovrebbe dare? se clicco sull'icona dovrebbe oltrte alle connesioni wifi disponibili anche darmi la connessione della penna? se è così non la vede.
dmeg
[ 2543.648126] usb 3-1: new full speed USB device using uhci_hcd and address 3
[ 2543.843279] usb 3-1: configuration #1 chosen from 1 choice
[ 2544.350130] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4D11
[ 2544.352416] usbcore: registered new interface driver usblp
[ 2551.165175] usblp0: removed
[ 2554.542512] type=1503 audit(1236081774.717:6): operation="inode_permission" requested_mask="::rw" denied_mask="::rw" fsuid=7 name="/dev/tty" pid=6913 profile="/usr/sbin/cupsd"
[ 4863.587199] ath5k phy0: unsupported jumbo
[ 5330.184158] usb 3-1: USB disconnect, address 3
[ 5339.848235] usb 3-1: new full speed USB device using uhci_hcd and address 4
[ 5340.015619] usb 3-1: configuration #1 chosen from 1 choice
[ 5340.245441] usbcore: registered new interface driver libusual
[ 5340.299841] Initializing USB Mass Storage driver...
[ 5340.302400] scsi2 : SCSI emulation for USB Mass Storage devices
[ 5340.303728] usbcore: registered new interface driver usb-storage
[ 5340.303791] USB Mass Storage support registered.
[ 5340.303807] usb-storage: device found at 4
[ 5340.303813] usb-storage: waiting for device to settle before scanning
[ 5340.314423] hso: /build/buildd/linux-2.6.27/drivers/net/usb/hso.c: 1.2 Option Wireless
[ 5340.314542] usbcore: registered new interface driver hso
[ 5345.302334] usb-storage: device scan complete
[ 5345.305269] scsi 2:0:0:0: CD-ROM ZCOPTION HSDPA Modem 3.00 PQ: 0 ANSI: 2
[ 5345.312479] scsi 2:0:0:0: Attached scsi generic sg1 type 5
[ 5345.414231] Driver 'sr' needs updating - please use bus_type methods
[ 5345.444868] sr0: scsi-1 drive
[ 5345.444884] Uniform CD-ROM driver Revision: 3.20
[ 5345.447294] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 5346.943177] UDF-fs: No VRS found
[ 5346.977180] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 5346.982194] ISOFS: changing to secondary root
[ 5570.479150] file-roller[8510]: segfault at 144 ip 0807a133 sp bf7ff7a0 error 4 in file-roller[8048000+54000]
[ 5645.392176] usb 3-1: USB disconnect, address 4
[ 5654.588100] usb 3-1: new full speed USB device using uhci_hcd and address 5
[ 5654.753209] usb 3-1: configuration #1 chosen from 1 choice
[ 5654.762289] scsi3 : SCSI emulation for USB Mass Storage devices
[ 5654.773134] usb-storage: device found at 5
[ 5654.773162] usb-storage: waiting for device to settle before scanning
[ 5656.056170] usb 3-1: USB disconnect, address 5
[ 5658.528359] usb 3-1: new full speed USB device using uhci_hcd and address 6
[ 5658.695638] usb 3-1: configuration #1 chosen from 1 choice
[ 5658.701609] hso0: Disabled Privacy Extensions
[ 5720.900255] ath5k phy0: unsupported jumbo
[ 6346.014598] ath5k phy0: unsupported jumbo
[ 6562.000185] usb 3-1: USB disconnect, address 6
[ 6846.461079] hso: unloaded
[ 6846.461125] usbcore: deregistering interface driver hso
[ 7012.157134] usb 3-1: new full speed USB device using uhci_hcd and address 7
[ 7012.321808] usb 3-1: configuration #1 chosen from 1 choice
[ 7012.326965] scsi4 : SCSI emulation for USB Mass Storage devices
[ 7012.331842] usb-storage: device found at 7
[ 7012.331871] usb-storage: waiting for device to settle before scanning
[ 7013.608174] usb 3-1: USB disconnect, address 7
[ 7014.920271] hso: /build/buildd/linux-2.6.27/drivers/net/usb/hso.c: 1.2 Option Wireless
[ 7014.923049] usbcore: registered new interface driver hso
[ 7016.089080] usb 3-1: new full speed USB device using uhci_hcd and address 8
[ 7016.257479] usb 3-1: configuration #1 chosen from 1 choice
[ 7016.264826] hso0: Disabled Privacy Extensions
[ 7293.505170] usb 3-1: USB disconnect, address 8
[ 7309.965069] usb 3-1: new full speed USB device using uhci_hcd and address 9
[ 7310.137498] usb 3-1: configuration #1 chosen from 1 choice
[ 7310.147276] scsi5 : SCSI emulation for USB Mass Storage devices
[ 7310.151324] usb-storage: device found at 9
[ 7310.151341] usb-storage: waiting for device to settle before scanning
[ 7311.458197] usb 3-1: USB disconnect, address 9
[ 7313.712121] usb 3-1: new full speed USB device using uhci_hcd and address 10
[ 7313.872938] usb 3-1: configuration #1 chosen from 1 choice
[ 7313.877253] hso0: Disabled Privacy Extensions
ciao e grazie
aggiornamento:
in APPLICAZIONI/INTERNET è stato installato il programma hsoconnect, che sembra funzionare, rileva la penna e la rete, ma qualsiasi cosa clicchi (anche altri programmi) si freeza tutto. per cui sono ancora al punto di prima. spero solo di non incasinare troppo (nel dmesg mi sembra rilevi degli errori).
grazie e ciao
mauro