Backlight doesn't work with latest Maverick kernel

Discussions about Linux installation and configuration on Samsung laptops
Lolo
Supporter
Supporter
Posts: 8
Joined: 01 May 2010, 08:16

Re: Backlight doesn't work with latest Maverick kernel

Post by Lolo »

The result is :

Code: Select all

[    0.000000] Kernel command line: ......ro splash vga=758 quiet splash acpi_backlight=vendor
So it seems to be perfect and I can finally adjust the brightness with the blue functions of the keyboard ;)

Big thank's to you Drake
Tillmos
Newbie
Newbie
Posts: 1
Joined: 26 Dec 2010, 14:01

Re: Backlight doesn't work with latest Maverick kernel

Post by Tillmos »

Hallo,

sorry my english is not so good. I have a Samsung N220. And after all changes and reboot the system the backlight is sometimes are blingking.
Then I can't change brightness step by step.
I have installed netbook edition 10.10., bootloader grub2,
What should i do?
Mystic-Mirage
Newbie
Newbie
Posts: 7
Joined: 11 Oct 2010, 10:26

Re: Backlight doesn't work with latest Maverick kernel

Post by Mystic-Mirage »

My N148 Plus blinks sometimes too.
xcflysurfer
Newbie
Newbie
Posts: 3
Joined: 26 Dec 2010, 06:07

Re: Backlight doesn't work with latest Maverick kernel

Post by xcflysurfer »

Hi I have successfully solved the backlight problems of my N148 with the acpi vendor stuff but now sometimes the backlight goes crazy (on/off) for 30 sec or so... seem like something else is trying to control it...
any :idea: suggestions?
jazz
Newbie
Newbie
Posts: 6
Joined: 25 Dec 2010, 16:44

Re: Backlight doesn't work with latest Maverick kernel

Post by jazz »

With the kernel 2.6.35-24.43~ppa1~loms~maverick and samsung-backlight 0.13.3~ppa1~loms~maverick on Xubuntu 10.10, on my Samsung NF310, I cannot set the brightness step by step, only the min or max brightness, with the keyboard or writing in /sys/class/backlight/samsung/brightness.
When I read from /sys/class/backlight/samsung/brightness, the value is always 0 or 7, and when it stays idle on power, it starts to blink.
jazz
Newbie
Newbie
Posts: 6
Joined: 25 Dec 2010, 16:44

Re: Backlight doesn't work with latest Maverick kernel

Post by jazz »

In fact, writing in /sys/class/backlight/samsung/brightness works in a console (outside X), it's only under X that something seems to force the brightness to either 0 or 7, nothing between!
themagni
Newbie
Newbie
Posts: 8
Joined: 07 Dec 2010, 16:55

Re: Backlight doesn't work with latest Maverick kernel

Post by themagni »

On the NF210, this just removes the functionality of the brightness buttons. In other words, without the line it would at least bring up the dialog. It now takes no action.

If your blue buttons are going crazy, did you edit the files to put the polling for your netbook?

http://ubuntuforums.org/showthread.php?p=10105497

Without that edit you will have hilariously spazzy reactions to the Fn keys; it's to do with the OS not providing the release.
jazz
Newbie
Newbie
Posts: 6
Joined: 25 Dec 2010, 16:44

Re: Backlight doesn't work with latest Maverick kernel

Post by jazz »

themagni wrote:On the NF210, this just removes the functionality of the brightness buttons. In other words, without the line it would at least bring up the dialog. It now takes no action.

If your blue buttons are going crazy, did you edit the files to put the polling for your netbook?

http://ubuntuforums.org/showthread.php?p=10105497

Without that edit you will have hilariously spazzy reactions to the Fn keys; it's to do with the OS not providing the release.
All these edits seem already done in the udev package from the Voria PPA.
riddley
Newbie
Newbie
Posts: 1
Joined: 31 Dec 2010, 12:23

Re: Backlight doesn't work with latest Maverick kernel

Post by riddley »

I had a similar problem on R580. The login screen was fine, but after login the desktop was very dark. I tried the different fixes suggested on this forum and elsewhere - no luck :(

I resolved the problem simply by downloading the proprietary Nvidia driver (using jockey-gtk).
Mawh
Newbie
Newbie
Posts: 4
Joined: 01 Jan 2011, 10:30

Re: Backlight doesn't work with latest Maverick kernel

Post by Mawh »

Hi,

first of all, thanks for your support, everyone. I would be in the greatest distress having to do all of this by myself !

But I am experciencing a weird issue with the posted fix ; everything was working fine until I had the idea to close the lid of my netbook (N210), and to re-open it - note that my system is set not to activate the sleep mode when the lid is closed, so closing the lid does nothing except protecting the screen. So when I opened the lid again, the screen was blinking, in fact it was switching from one level of brightness to another several times a second, the indicator appearing normally on the right-top corner of the screen. It went like this for thirty seconds, with me trying to mess with the brightness controls, hoping to fix this by myself, and it eventually stopped. The second time I tried not to do anything, and it stopped about fifteen seconds later. The third time, it went for two minutes, as I tried desperately to find a fix, still messing with the brightness keys...

...so ?! What the hell ?! It's a funny problem but a bit annoying and I think it's not good for the backlight itself... any idea ? Thanks.

PS : 10.10, grub2, any need of other details ?
Mawh
Newbie
Newbie
Posts: 4
Joined: 01 Jan 2011, 10:30

Re: Backlight doesn't work with latest Maverick kernel

Post by Mawh »

It doesn't seem to stop at all now. Last time the whole display became buggy... the gnome panel at the bottom didn't display the application buttons anymore, I had to reboot... weird issue indeed ! I fear my backlight is going to die prematurely. :/

Edit : It happened again, but I let it go this time just to see ; it lasted eighty seconds, then stopped by itself.
marcio
Newbie
Newbie
Posts: 8
Joined: 02 Jan 2011, 23:55

Re: Backlight doesn't work with latest Maverick kernel

Post by marcio »

Hi,
I have also the same problem of the brightness control going crazy on my N230. There must be something else trying to control the brightness...any idea? The way I stop the crazy behaviour is by trying to change the volume. Don't know why, but if I start pressing Fn + left or right arrow, then it stops. Does it work the same for you?

cheers
nanders
Newbie
Newbie
Posts: 7
Joined: 03 Jan 2011, 14:14

Re: Backlight doesn't work with latest Maverick kernel

Post by nanders »

I am new to linux and ubuntu, and I have the same problem (flickering backlight after fix) on my N210...

I registered to this forum because of this, I hope anyone can help us out here..
Mawh
Newbie
Newbie
Posts: 4
Joined: 01 Jan 2011, 10:30

Re: Backlight doesn't work with latest Maverick kernel

Post by Mawh »

@marcio : doesn't work for me, but I found another way to stop it : one click on the menu button.
nanders
Newbie
Newbie
Posts: 7
Joined: 03 Jan 2011, 14:14

Re: Backlight doesn't work with latest Maverick kernel

Post by nanders »

I was able to stop the flickering also by adjusting the volume.

When I disable the 'dim display when idle' option in the power management display, the flickering doesn't return. Although this may not be the way it should, it works for me just now..
Post Reply